This short video was created to show the basics of how a Fluidized Temperature Bath operates. It was made using our smallest, bench top Fluidized Bath model FTBSL6.

We are launching the new model ECU1 portable HEPA Air Filtration System that when used in conjunction with one of our Fluidized Baths can provide environmentally friendly extrusion and injection [...]

A Fortune500 chemical company approached ATS about their need for a temperature source to heat a large coil reactor for a research and development project. Their standard operating temperature [...]

Accurate Thermal Systems Fluidized Temperature Baths are now being used to clean tooling and hardware used to manufacture various pet products and treats. In an effort to expand our base of [...]

ATS has developed and now offers Temperature Validation Software (TVS) that works with all of our Fluidized Temperature Bath models. The TVS software will be very useful for customers who need to [...]

ATS is running a half page ad in Plastics Technology around the NPE2018 Plastics Show in Orlando which will be from May 7th to May 11th. The ad will run in the March, April and June 2018 [...]

ATS is now an authorized distributor of the complete Polyscience line of products including heated water baths, refrigerated circulating baths, immersion circulator, chiller systems and precision [...]

We will be located at Booth S10048 in South Hall. Come stop by! www.npe.org

Accurate Thermal Systems is pleased to announce the latest addition to our Fluidized Temperature Bath line with the launch of the model FTBLL12W. This model offers customers a much larger working [...]

Innovative New Bench Top Fluidized Temperature Bath Accurate Thermal Systems is pleased to announce the latest addition to our Fluidized Temperature Bath line. With the release of our new model [...]

Accurate Thermal Systems has announced they are now authorized distributors of SIKA products. Click here to view the new line of Dry Block Calibrators now offered.

Accurate Thermal Systems based in Hainesport, NJ, specializes in manufacturing and supplying precision temperature sources for a wide range of applications as well as distributing temperature [...]

Accurate Thermal Systems based in Hainesport, NJ, develops custom Fluidized Temperature Bath systems for a Fortune 500 medical device company. Accurate Thermal Systems has recently designed, [...]

Dynisco, a world leader in developing innovative, high-quality solutions for plastics extrusion processing for 60 years, recommends Accurate Thermal Systems Fluidized Temperature Baths as a fast, [...]

New Product Alert! Accurate Thermal Systems is announcing the new release of our ThermCal130 calibrator. Our new lightweight calibrator weighing in at 17lbs, the ThermCal130 is perfect for use on [...]

Product Video

Minimal labor is required to quickly remove Polystyrene using a Fluidized Bath.

Removing PET from extrusion breaker plates in less than 1 hour.

Pyrolyzing HDPE with color concentrate from tooling in Fluidized Bath.

Cleaning small parts coated with Nylon in the model FTBSL6 Fluidized Bath.

Removing acrylic from an extrusion die plate.

Hard to remove PEEK easily cleaned from small extrusion parts.

Struggling to remove EPR rubber from tooling? See this video…

Burning off Polycarbonate with titanium oxide from tooling.

Fast removal of Thermal Plastic Vulcanate from extrusion tooling.

Quickly pyrolyzing HDPE, ABS and PP from extrusion dies.

Removal of hard PEEK from small extrusion dies.

Removing LLDPE from brass parts in a Fluidized Bath.

A tough elastomer was quickly reduced to ash in this video. The customer was spending hours cleaning these parts.

Nylon and Rubber with CPE were pyrolyzed quickly from Extrusion tooling in the Fluidized Bath.

In this video high temperature PEEK was removed from a 20mm diameter feed screw. This was taking the customer over 4 hours to clean but only took 1 hour in our Fluidized Bath.

3 pounds of EO Elastomer were removed from a 43 pound, 11” diameter breaker plate.

Nylon & Vinyl plastic were quickly removed from extrusion breaker plates, tips and dies in the model FTBLL12 Fluidized Bath in under 38 minutes. Big time saver as customer was taking over 4 [...]

How does a Fluidized Bath affect extrusion tooling made from D2 and 4140HT steel? This test was performed to quell any concerns  regarding the placement of tooling into a Fluidized Bath heated [...]

Over 1 pound of plastic was removed from the 8” diameter breaker plate in this video. The customer was spending several hours cleaning this part which can now be reduced to 1 hour in the [...]

Polyethylene was quickly removed from a breaker plate supplied by a customer in France.

1 1/2lb of Nylon was removed from an extrusion end cap breaker plate and other hardware in under 50 minutes.

Peek and Tefzel were easily removed from Inconel extrusion tooling supplied by a customer for sample cleaning.”

In this video the customer’s cleaning time per batch was reduced 5 hours by cleaning them in a Fluidized Bath at 850 F for 40 minutes.

A 4 inch breaker plate covered with Polypropylene was thoroughly cleaned in the Fluidized Bath after 20 minutes at 850F.

In this video several parts were cleaned including removal of Polypropylene from a 1 inch diameter feed screw after 850F for 20 minutes.

Polysulfone UDEL was removed in this sample cleaning after 15 minutes at 925F.

Crosslink PE was pyrolized off of a Gala pelletizer die after being in the Fluidized Bath for 1 hour at 780F.

This video shows a breaker plate before and after FEP polymer was removed.  It was subjected to 950F for 15 minutes in the Fluidized Bath.

Accurate Thermal Systems has launched an innovative new accessory to its extrusion tool cleaning Fluidized Baths. The new Sensor support tray fits into the standard parts basket of our models [...]

TPU alloy and a hard adhesive were removed in 30 minutes from guider and lip steel parts. A big time savings over the 5 hours typically required in a burnoff oven.

Tough fluoropolymers were easily removed from the customer supplied extrusion tip, die and breaker plates in under 1 hour.

The Fluidized Bath easily pyrolyzed the large amount of Polycarbonate and ABS plastic inside the tip and nozzle supplied by the customer.

The Thermoplastic elastomer removed easily from these extrusion profile die plates after 30 minutes at 850F.

The polypropylene on these breaker plates with very small holes removed easily as well as the tips after being in the Fluidized Bath for 30 minutes at 850F.

Accurate Thermal Systems is manufacturer and distributor for a range of Dry Block temperature calibrators and Micro Liquid calibration baths that are used for calibration of many types of [...]

Accurate Thermal Systems has several models of Fluidized Baths that provide very stable and uniform temperature environments for heat treatment, annealing, tempering, thermal stress analysis and [...]

Accurate Thermal Systems Fluidized Baths can be used to thermally clean metal parts by pyrolyzing all types of plastic, paint, resin, adhesive, glue, oil, silicone, rubber and grease. They are a [...]

Customer supplied a Spinneret that’s used for extruding polypropylene fibers for sample cleaning. All material was removed from the fiber feed holes and internal channels after 30 minutes at 900F.

These extrusion parts were filled and coated with HDPE containing silane. All material was removed after 40 minutes at 850F in the Fluidized Bath.

PVC was completely removed from small extrusion tooling with relative ease. Parts were wiped off with a rag afterwards.

0.8 lbs of TPO was removed from the breaker plate which weighed 4.4lbs after cleaning.

AEK was removed from the breaker plate after 40 minutes at 1000F.

A breaker plate filled with dense silicone rubber was supplied for thermal cleaning. All material was removed after 60 minutes at 975F and the assembly easily came apart including screens.

This extrusion profile die was thermally cleaned in a Fluidized Bath for 35 minutes at 875F. All of the Flexible PVC was removed. The temperature could be reduced to 825F with similar results.

The customer supplied us with several hooks that were coated with Powder coat paint. The paint was reduced to an ash after 30 minutes at 950F and could be easily wiped off with a rag after [...]

A 12” long feed screw with HDPE on it was supplied for cleaning. All material came off quite nicely at 850F for 40 minutes. An ultimate recipe of 825F for 45 minutes would work fine for this part.

The 6” breaker plate made of hastelloy had a yellow compound filling the holes. The material was removed after 40 minutes at 925F. Rubber typically requires a temperature of 900 to 975F for [...]

A die and breaker plate that were covered with ETFE were thermally cleaned at 900F for 20 minutes. Both pieces of tooling were manufactured from Inconel. The screens behind the breaker plate [...]

4″ breaker plates were filled with Polyurethane, which was completely removed after 30 minutes at 850F.